[Flightgear-flightmodel] Spitfire Vb

[Pui Lau]

Dear Sir or Madam


I am Pui Lau and currently modeling SpitfireVb over Simulink model. However, when I launched FlightGear, the wing of the spitfire was bent up. I tried different commands that on the common command session. What should I do so that the wing is able to expand.


The following attachment is the photo of the spitfireVb.


Regards,

Pui Lau

[Erik Hofman]

Hi Pui Lau,

On 07/17/2017 03:41 PM, Pui Lau wrote:
> Dear Sir or Madam
>
>
> I am Pui Lau and currently modeling SpitfireVb over Simulink model.
> However, when I launched FlightGear, the wing of the spitfire was bent
> up. I tried different commands that on the common command session. What
> should I do so that the wing is able to expand.

Looking at the configuration you should set controls/flight/wing-fold to
0 for example by specifying

--prop:bool:/controls/flight/wing-fold=false

Erik
--
http://www.adalin.com - High performance virtual reality audio software.

[Pui Lau]

Dear Mr Hofman

This is what I have set in my spifireVb.xml file:

<control-input axis="controls/flight/wing-fold=false"
control="SPOILER"/>
<control-output control="SPOILER"
prop="/surface-positions/wing-fold-pos-norm=false"/>
<control-speed control="SPOILER"
However, the wing still folded. I looked at the help>aircraft help>Crtl-F , this command is for toggle wing fold, but it does not work. Also, the engine was not started when I simulate the aircraft (even the start button doesn't give any response).

Regards,
Pui Lau
________________________________
From: Erik Hofman <***@ehofman.com>
Sent: 18 July 2017 16:18:37
To: flightgear-***@lists.sourceforge.net
Subject: Re: [Flightgear-flightmodel] Spitfire Vb

Hi Pui Lau,

On 07/17/2017 03:41 PM, Pui Lau wrote:
> Dear Sir or Madam
>
>
> I am Pui Lau and currently modeling SpitfireVb over Simulink model.
> However, when I launched FlightGear, the wing of the spitfire was bent
> up. I tried different commands that on the common command session. What
> should I do so that the wing is able to expand.

Looking at the configuration you should set controls/flight/wing-fold to
0 for example by specifying

--prop:bool:/controls/flight/wing-fold=false

Erik
--
http://www.adalin.com - High performance virtual reality audio software.