Rotor ccw=0

[HB-GRAL]

Is there a sample of a rotors which have ccw=0? Bo105, EC135, S76c and
UH-1 have ccw=1. My AS-332 has ccw=0. I calculated and configured now a
lot of things and the helo has a very good performance now with ccw=1 -
but ;-) I get confused now how I have to set nx/y/z and fx/y/z when I
set ccw to "0".

Thanks for your answers - HBGreets

[Heiko Schulz]

Hi,

Ec130 in cvs has ccw=0.
nx/y/z and fx/y/z needs to my knowledge no change if ccw=0
Regards
HHS
still in work: http://www.hoerbird.net/galerie.html
But already done: http://www.hoerbird.net/reisen.html



----- Ursprüngliche Mail ----
Von: HB-GRAL <***@sablonier.ch>
An: Flightgear Flightmodel List <flightgear-***@lists.sourceforge.net>
Gesendet: Freitag, den 8. Mai 2009, 10:30:07 Uhr
Betreff: [Flightgear-flightmodel] Rotor ccw=0

Is there a sample of a rotors which have ccw=0? Bo105, EC135, S76c and
UH-1 have ccw=1. My AS-332 has ccw=0. I calculated and configured now a
lot of things and the helo has a very good performance now with ccw=1 -
but ;-) I get confused now how I have to set nx/y/z and fx/y/z when I
set ccw to "0".

Thanks for your answers - HBGreets

------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Flightgear-flightmodel mailing list
Flightgear-***@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/flightgear-flightmodel

[Maik Justus]

Hi,

the alouette2 has ccw=0, too.
If you are starting with a ccw=1 setup, you need to adjust the
force-direction of the tail rotor and inverse the collective input of
the tail rotor.

Best regards,
Maik

Post by Heiko Schulz
Hi,
Ec130 in cvs has ccw=0.
nx/y/z and fx/y/z needs to my knowledge no change if ccw=0
Regards
HHS
still in work: http://www.hoerbird.net/galerie.html
But already done: http://www.hoerbird.net/reisen.html
----- Ursprüngliche Mail ----
Gesendet: Freitag, den 8. Mai 2009, 10:30:07 Uhr
Betreff: [Flightgear-flightmodel] Rotor ccw=0
Is there a sample of a rotors which have ccw=0? Bo105, EC135, S76c and
UH-1 have ccw=1. My AS-332 has ccw=0. I calculated and configured now a
lot of things and the helo has a very good performance now with ccw=1 -
but ;-) I get confused now how I have to set nx/y/z and fx/y/z when I
set ccw to "0".
Thanks for your answers - HBGreets
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Flightgear-flightmodel mailing list
https://lists.sourceforge.net/lists/listinfo/flightgear-flightmodel
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Flightgear-flightmodel mailing list
https://lists.sourceforge.net/lists/listinfo/flightgear-flightmodel