haseeb ahmed
2014-03-25 06:26:01 UTC
I'd like to take assistance in cracking the error i get when i run the
Flightgear simulation via. Matlab.
The program is written in such way that the airplane for example, the
running time should be 500 seconds, airplane must be at 30000 ft height,
120 deg heading, Mach 0.50, KSFO airport (12L runway), etc,. That is the
simulation must start with the airplane being mid-air at mentioned speed.
After running the MATLAB program successfully and the opening of FlightGear
tool in MATLAB, the FlightGear opens up and the airplane remains static and
is not moving at any direction. I also get the error which i cannot able to
recognize and rectify. Kindly visit the url. (I've taken a snapshot of the
error box)
Loading Image...
Looking forward for someone to solve the issue!
Flightgear simulation via. Matlab.
The program is written in such way that the airplane for example, the
running time should be 500 seconds, airplane must be at 30000 ft height,
120 deg heading, Mach 0.50, KSFO airport (12L runway), etc,. That is the
simulation must start with the airplane being mid-air at mentioned speed.
After running the MATLAB program successfully and the opening of FlightGear
tool in MATLAB, the FlightGear opens up and the airplane remains static and
is not moving at any direction. I also get the error which i cannot able to
recognize and rectify. Kindly visit the url. (I've taken a snapshot of the
error box)
Loading Image...
Looking forward for someone to solve the issue!